| CVS4 |
| PERFORMANCE |
| Frequency Response (-3dB) (1) |
85Hz - 19kHz |
| Frequency Range (-10dB) (1) |
77Hz - 22kHz |
| System Sensitivity (1W @1m) (2) |
87dB (1W = 2.45V for 6 Ohms) |
| Nominal Coverage Angle |
90 degrees conical |
| Coverage Angle (1kHz to 6kHz) |
102 degrees conical |
| Directivity Factor (Q) |
5.6 averaged 1kHz to 6kHz |
| Directivity Index (DI) |
7.1 averaged 1kHz to 6kHz |
| Rated Maximum SPL |
Average: 103dB
peak: 109dB |
| Power Handling (3) |
Average: 40W
Programme: 80W
Peak: 160W |
| Recommended Amplifier Power |
80W @ 6 Ohms |
| Nominal Impedance |
6 Ohms |
| Transformer Taps (via front rotary switch) |
70V: 30W / 15W / 7.5W / 3.75W / OFF & low impedance operation
100V: 30W / 15W / 7.5W / OFF & low impedance operation |
| Crossover |
2.7kHz |
| TRANSDUCERS |
| Low Frequency |
100mm (4.00") mineral loaded cone |
| High Frequency |
19mm (0.75") coaxially mounted |
| PHYSICAL |
| Enclosure |
Back Can: Zinc plated steel
Baffle: UL 94V-0 rated ABS
Grille: Steel, with weather resistant coating |
| Safety Features |
Safety ring located at rear of enclosure for load bearing safety bond |
| Clamping Design |
Security toggle clamp |
| Cable Entry Options |
Cable clamp & squeeze connector for conduit up to 22mm |
| Connectors |
Removable locking connector with screw terminals with "loop through" facility |
| Safety Agency Ratings |
UL-1480, UL-2043, CE |
| Hole Cutout Diameter |
180mm (7.09") |
| Dimensions |
Bezel diameter: 213.0mm (8.39”)
Front of ceiling to rear of back can: 202.5mm (7.97”)
Front of ceiling to top of safety loop: 214.90mm (8.46")
|
| Net Weight (ea) |
2.60kg |
| Included Accessories |
C Ring
Tile bridge
Paint mask
Cutout template
Grille |
| Optional Accessories |
Plaster (mud) ring |
| Notes: (1) Average over stated Bandwidth. Measured in an IEC baffle in an Anechoic Chamber (2) Unweighted Pink noise input, measured at 1m on axis (3) Long term power handling capacity as defined in EIA - 426B test |
