เครื่องเสียง ระบบประกาศ ไอพี TOA DA-X1000S-AS , DA-X1000S-EA Digital Power Amplifier 1x1000W

Digital Power Amplifier 1x1000W

DA-X1000S-EA

This is a Class D amplifier used for VX-1000 system which is compliant with the Chinese Standard CCCF for fire alarm system, connected by a dedicated interface. This has AUX INPUT which is for general purpose connection. DA-X1000F single-channel amplifier is a part of VX-1000 Basic system and these models will be used with VX-1000MC. Basic concept is smooth connection and interface with VX-1000MC. PA-LINK connection with RJ45 connector is used.

．Low-loss Class D power amplifier.

．1 channels 1000W.

．can be used as standby amplifier

Specifications

Power Source AC220V-240V, 50Hz/60Hz

Amplification System Class D amplifier

Power Consumption 30W(standby mode), 1200W(Rated output 100V line, 10Ω)

Input 1 channel: PA LINK (Dedicated Interface with VX-1000MC)

1 channel: AUX INPUT=0dB(1V) (Input level control in maximum position), 20kΩ, electronically-balanced

Rated Output 1 channel: 1,000W (100V line, 10Ω)

Frequency Response 110~16,000Hz ±3dB

Total Harmonic Distortion 0.4% (1W), 1% (Rated output)

Protection Circuit Overcurrent protection, under-voltage protection, overvoltage protection, overheat protection, short circuit protection

Signal to Noise Ratio >90dB (A-weighted)

Control Input ACTIVE: Short=AUX INPUT signal source goes Amplifier output/ Open= PA LINK signal source goes Amplifier output

LED Indicator POWER (Green) x 1, SIGNAL (Green) x 1, PEAK (Red) x 1, AUX ACTIVE (Orange) x 1, FAULT (Red) x 1

Cooling Forced air cooling by FAN

Operating Temperature 0°C~+40°C

Operating Humidity ≤90% RH (no condensation)

Finish Front panel AL Black, Cover SECC Black

Control Front: Power switch

Rear : Input volume

Dimensions 483(W)×88(H)×392(D)mm

Weight 6.18kg

Included Accessories CN)AC power cord x1, (EN)AC power cord x1, pluggable terminal block 2P x1, pluggable terminal block 5P x1