| 
	
		
			| 
			เครื่องผสมสัญญาณเสียงพร้อมเครื่องขยายเสียง 120 วัตต์   สอบถามราคาพิเศษ โทร. 02-996-4400 , 081-490-7799   คุณสมบัติเฉพาะ 
				เครื่องขยายเสียงแบบโมโน กำลังขับ 120 วัตต์ตอบสนองความถี่ในช่วง 50-16,000 เฮิร์ท (+1 ดีบี,-3ดีบี)มีค่าความเพี้ยนน้อยกว่า 0.5% ที่ 1 กิโลเฮิร์ทมีอัตราส่วนสัญญาณเสียงต่อสัญญาณรบกวน : MIC 1,2,3 : 66 ดีบี : AUX 1,2 : 80 ดีบีมีช่องรับไมโครโฟน 3 ช่อง , ช่องสำรอง (AUX ) 2 ช่อง และช่องสัญญาณฉุกเฉิน (EMC) 1 ช่องช่องสัญญาณ MIC 1, EMC สามารถหรี่เสียงช่องสัญญาณ อื่นได้ช่อง MIC 1 มีความต้านทาน 600 โอห์ม แบบ Unbalanceช่อง MIC 2,3 มีทั้งช่องรับสัญญาณไมค์ [ ขั้วต่อมีให้เลือกทั้งแบบ XLR (Balance) และPHONE (Unbalance) ] และช่องรับสัญญาณ LINE [ ขั้วต่อเป็นแบบ RCA ( Unbalance) ]ช่อง AUX 1, 2, EMC มีความต้านทาน 10 กิโลโอห์ม แบบ Unbalanceช่อง MIC 2, 3 มีสวิทซ์เลือกใช้ Phantom Power แยกอิสระต่อกันมีปุ่มปรับระดับเสียง MIC 1,2,3, AUX 1,2 ,เสียงทุ้ม,เสียงแหลมและ Master แยกอิสระต่อกันมีช่องต่อสัญญาณขาออกเพื่อนำไปต่อร่วมกับอุปกรณ์ภายนอกมีจุดต่อลำโพงแบบ 70,100 โวลท์ เอซี และ 4-16 โอห์มมีพัดลมระบายความร้อน จะทำงานเมื่ออุณหภูมิของเครื่องสูงถึง 55° Cมีไฟ LED แสดงระดับสัญญาณขาออก 6 จุดมีวงจรป้องกัน Short Circuit ,Overload และ Hi   The basic public address mixer amplifiers have power ratings from 30W, 60W, 120W, 240W, 350W, 500W to 650W. They are featured of 3 balanced microphone inputs, 2 aux inputs and 2 EMC inputs. Priority muting is achieved via EMC1-2 for overriding other inputs except Mic1 on front panel. Individual gain controls are provided for Mic 1-3 and Aux 1-2, bass and treble controls and master volume control are provided for overall tone control. 70V, 100V and low impedance 4-16ohms speaker outputs are provided. Extensive protection from short-circuit, overload and high temp.   Features 
				Mixer amplifier for paging and background music systemRated power from 30W, 60W, 120W, 240W, 350W, 500W to 650W2U rack mount (less than 350W) and 3U rack mount design70V, 100V and low impedance 4-16ohm speaker outputThree balanced Mic inputsMic 1(phone jack) with VOX priority and VOX level on front panelMic 2-3 by XLR type on rear panel with phantom powerTwo Aux Inputs and 2 line inputs for spare useTwo EMC priority inputsEMC1 has priority over all inputs except MIC1Mic 1-3, Aux 1-2 and master volume controls and bass/treble tone controlShort circuit, overload and high temp protection   Optional 
				DC 24V available on less than 500W modelsPanel with/without handholdFaults monitoring module, it can output short circuit signal to achieve main/spare amplifier   SPECIFITIONS :    
			
				
					
						| Model | T-30B | T-60B | T-120B | T-240B |  
						| Rated Power Output | 30W | 60W | 120W | 240W |  
						| Speaker Outputs | 70V, 100V & 4~16Ω |  
						| Input Sensitivity & Impedance | MIC 1, 2, 3: 5mV/600Ω, Unbalanced phone jack input |  
						| MIC 2, 3:±2.5mV/2KΩ, balanced XLR input |  
						| MIC 2, 3: 775mV/10KΩ, Unbalanced RCA input |  
						| AUX 1, 2: 350mV/10KΩ, Unbalanced RCA input |  
						| EMC: 775mV/10KΩ, Unbalanced RCA input |  
						| Output Sensitivity & Impedance | MIX OUT: 1000mV/470Ω, Unbalanced RCA output |  
						| Tone | Bass:±10dB at 100Hz |  
						| Treble:±10dB at 10KHz |  
						| Frequency Response | 50Hz~16KHz(+1dB, -3dB) |  
						| S/N Ratio | MIC 1, 2, 3: 66dB, AUX 1, 2: 80dB |  
						| THD | Less than 0.5% at 1KHz, 1/3 rated power |  
						| Muting Function | MIC 1 overrides other input signals |  
						| with 0-30dB attenuation |  
						| Tone Control | ±2.5mV~±75mV at 30dB |  
						| Crosstalk | ≤50dB |  
						| Phantom Power | +48V, with LED indicator |  
						| Cooling | Fan automatically start up when temp reaches 55℃ |  
						| Protection | High temp, overload & short-circuit |  
						| Power Supply | ~110V/60Hz or ~230V/50Hz or DC 24V |  
						| Power Consumption | 60W | 100W | 200W | 400W |  
						| Weight | 6.9Kg | 7.3Kg | 9.5Kg | 16.8Kg |  
						| Dimensions | 484x335x88mm | 484x385x88mm |  
						| Finish | Panel: aluminum plate, black Case: steel plate, black |  |  |