The TCX-10 is a passive two-way loudspeaker consisting of a 10" low frequency driver and a 1" high frequency compression driver on a Converging Elliptical Waveguide™ in a trapezoidal enclosure.
When permanently installed the cabinet presents a discreet appearance with no visible side handles, while for portable applications the pole mount blanking plug can be removed for use with speaker stands and poles, and a single carrying handle is provided for transportation.
The TCX-10 features a Converging Elliptical Waveguide™, generating a smooth wavefront while giving excellent pattern control. The waveguide is rotatable through 90°, allowing a swap of the horizontal and vertical dispersion patterns.
The cabinet includes internal threaded rigging points for use with Turbosound wall and ceiling brackets, and OmniMount™ loudspeaker brackets. It is finished as standard in black textured paint (or optional white), and the rear panel provides two Speakon NL4 connectors wired in parallel with a 4-way barrier strip connector.
When used with optional Turbosound Loudspeaker Management Systems, TCX loudspeakers can be controlled and monitored over a BVNet network using TurboDrive™ control software.
| Net Weight |
13.5kg (29.7lbs) |
| Dimensions |
492mm x 370mm x 332mm (19.4" x 14.6" x 13.1") |
| Components |
1 x 10” (254mm) LF driver, 1 x 1” (25mm) HF driver on a Converging Elliptical Waveguide™, 1 x 10” (254mm) LF driver, 1 x 1” (25mm) HF driver on a Converging Elliptical Waveguide™ |
| Frequency Response |
100Hz - 20kHz ±3dB, 68Hz - 20kHz ±10dB |
| Dispersion |
90°H x 60°V @ -6db points |
| Power Handling |
250 watts continuous, 500 watts program |
| Sensitivity |
95dB, 1w @ 1m |
| Maximum SPL |
119dB continuous, 125dB peak |
| Impedance |
8 ohms |
| Crossover |
2k5Hz |
| Construction |
15mm (/8") birch plywood, finished in black semi-matt textured paint |
| Grille |
Powder coated perforated mild steel |
| Connectors |
(2) Speakon NL4MP wired pin 1+: positive, pin 1-: negative, pins 2+ and 1- N/C, (1) 4-way barrier strip connector, (2) Speakon NL4MP wired pin 1+: positive, pin 1-: negative, pins 2+ and 1- N/C, (1) 4-way barrier strip connector |
| Flying Hardware |
(10) M10 internal rigging points for eyebolts
(4) M8 internal rigging points for Turbosound wall and ceiling brackets (60mm x 60mm)
(4) M6 internal rigging points for OmiMount™ brackets (108mm x 51mm) |
| Options |
White semi-matt textured paint |
| Spares & Accessories |
LS-1027 10” LF loudspeaker
RC-1027 Recone kit
CD-120 1” Compression driver
RD-120 Replacement diaphragm
TCX-002 Passive crossover
WB-20 Wall bracket
CB-55 Ceiling bracket
PB-55 Pole bracket
TCX-SB10 Swivel bracket
PA-90 Speaker pole 90cm
PA-100 Speaker pole 100cm
|
