The TURBOSOUND FLASHLINE MONITOR TFM122M is a compact 1,400 Watt switchable passive/bi-amped floor monitor consisting of a co-axial carbon fibre loaded 12" neodymium low frequency and titanium dome 1" neodymium high frequency combination driver in a reflex loaded enclosure designed for concert touring. The co-axial drive unit is matched with an exponential horn flare for improved acoustic loading and controlled coverage. Both HF and LF coils utilise the same neodymium magnet assembly, which gives better efficiency and reduced weight. This allows the creation of a minimal footprint monitor wedge which, combined with a 35° projection angle and 60° horizontal by 40° vertical dispersion pattern, is ideal as a vocal monitor on smaller stages where space is limited, while its low profile maximises audience sightlines.
The 15 mm (5/8") birch plywood cabinet is equipped with two flush recessed handles, and Neutrik speakON* NL4 connectors are provided at each side for tidy inter-connects. The cabinet is finished in semi matt black paint finish and includes a curved profile perforated steel grille backed with reticulated foam and supported by a steel reinforcing strip positioned across the front of the drive unit. A recessed pole mount socket is provided for use on speaker poles or tripods.
Feature.
- 2 way stage monitor for touring applications
- 350 Watts continuous, 1,400 Watts peak power
- Carbon fibre loaded 12" neodymium motor low frequency driver
- Titanium dome 1" neodymium motor compression driver
- Low profile design to maximise audience sight lines
- Low distortion waveguide provides 60° H x 40° V dispersion
- Switchable passive/bi-amp operation for flexibility of use
- 15 mm (5/8") birch plywood enclosure with hard wearing semi matt black paint finish
- Rugged powder coated perforated steel mesh grille
- Neutrik speakON* NL4 connectors for reliable long life operation
- 3-Year Warranty Program**
- Designed and engineered in England
Specs.
Dimensions (H x W x D) |
314 x 450 x 536 mm (12.4 x 17.7 x 21.1") |
Net Weight |
19 kg (41.8 lbs) |
Components |
1 x coaxial 12" (305 mm) LF driver / HF compression driver |
Frequency Response |
75 Hz - 18 kHz ±3 dB, 60 Hz - 20 kHz ±10 dB |
Dispersion |
60° H x 40° V @ -6 dB points |
Sensitivity (1 W @ 1 M) |
95 dB 1 Watt @ 1 metre |
Power Handling |
LF: 350 Watts r.m.s., 1400 Watts peak
HF: 80 Watts r.m.s., 320 Watts peak
Passive: 500 Watts r.m.s., 2000 Watts peak |
Calculated Max SPL |
122 dB continuous, 128 dB peak |
Nominal Impedance |
LF: 8 Ohms, HF: 8 Ohms, passive: 8 Ohms |
Crossover |
Passive crossover network at 1 k3Hz, switchable active/passive |
Construction |
15 mm (5/8") birch plywood, finished in black textured polyurethane. Two recessed carrying handles. Pole mount socket. |
Grille |
Black powder coated perforated steel backed with foam |
Connectors |
2 Neutrik speakON* NL4 wired: pin1+: LF positive, pin1-: LF negative, pin2+: HF positive, pin2-: HF negative |
Protection
|
|